Anti Rust Construction Formwork Accessories B18 Single Flared Coil Loop Insert

Concrete Building Fasteners B18 Single Flared Coil Loop Insert for Concrete Forming Accessories

Product Description:

Single Flared Coil Loop Ferrule Inserts for Construction

• The load carrying capacity of any cast-in-place concrete insert is largely dependent upon the ability of the insert to draw upon the tensile strength of the mass of concrete within which it is embedded.

• The B18 Single Flared Coil Loop Insert makes effective use of this principle by increasing the depth and width of concrete embedment. •

• B18 inserts are available with an optional B3 Screw-on Coil for use with the B30 Screw-on Plastic Cone which acts to set the insert back from the face of the concrete. •

• Minimum spacing between inserts is twice the corner distance.

• A wider flare increases strength over straight loop inserts.

• Available in 1/2”, 3/4” bolt diameters.

• Parallel-Flared version This insert doubles the cross-sectional area of steel embedded in the concrete and increases the area of the shear cone, but can still be used for more confined applications where space is lacking.

• Double-Flared and Criss-Cross versions increase the cross-sectional area of steel embedded in the concrete, whereby increasing the area of the shear cone.

• It has been designed for use in thicker precast concrete elements.

• All version available with or without washer. Plain and electroplated finishes are standard. Hot-dip galvanize finish is available.